|Category||Farming Simulator 22|
|Nina Andersen (WolfieeGirl)||19.07.2022 02:22|
|Hi again guy`s. I hope this is the right place to ask. I have made a ingame mod, i want to be able to fill 50000L in it, now it`s on 15000L
When I adjust the capasity to 50 000L the trailer is almost not moving it`s very slow or not move at all. The wheels are little down in the ground. I suspect that is why it`s not moving as it should. I have always bean struggle little with these things. I have tried to change the numbers on the suspension in the trailer.xml file and also tryed to adjust some numbers on the wheels but it wont lift the wheels out of the ground.
Now the question is, what do I need to look at to adjust these things. Maby several numbers need to be adjusted but I don`t know. So I need some tip on my way. I will be very gratefull if I can ge a little help on this, just a little.
|William Rowe (Bonger76)||19.07.2022 05:48|
|You can incress the spring="125" in the <wheelConfiguration section to a higher number or you can
add this after the capacity="50000" updateMass="false" , the updateMass false makes it so thier is no load wieght on the trailer you
could make it hold whatever you whant
|Nina Andersen (WolfieeGirl)||20.07.2022 06:13|
|I got it to work :) Thank you again william. It
`s nice to see that some people actual have a heart to help people that don`t know so much. I have bean on some forums and youtube too for some help, even live streams but not single one did not help, Some of them don`t even say hello to you, it`S a shame if you ask me. They want your likes but to give some thing back is hard for them. So thank you William for having a heart :)
|William Rowe (Bonger76)||20.07.2022 15:55|
|No problem,if you have the"development "set to "true" in your game.xml and use F5 it scrolls through light and colisions and A couple of other thing.
I think it is the collision you can see the tire collision it is A white ring that tures orange color when active it can help you see what the wheel is really
doing,and if you ajusted the spring number and one of your set is not touching the groud or not spinning like the back set you can riase it's spring number or lower the front set to help it ride level.I always use the " updateMass="false" " so I dont have to do so much back and forth to silo or
sellPoint I'm not A relistic player.
Note: Log in to post. Create a new account here.